Position in the Information Landscape
When working with ET 200S fail-safe modules and depending on your particular application,
you will need to consult the additional documentation listed below.
References to additional documentation are included in this manual where appropriate.
Documentation
ET 200S Distributed
I/O system
manual
Safety Engineering in
SIMATIC S7
system
description
For integration in the
S7 F/FH F-systems
For integration in the
S7 Distributed Safety
F-system
STEP 7
manuals
STEP 7
online help
PCS
7 manuals
The entire SIMATIC S7 documentation is available on CD-ROM.
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Brief Description of Relevant Contents
Describes all generally applicable topics related to the ET 200S hardware (including
configuration, installing, and wiring of the ET 200S) and the IM 151 interface module.
Provides an overview of the implementation, configuration, and method of operation of
•
S7 Distributed Safety and S7 F/FH fail-safe automation systems
Contains a summary of detailed technical information concerning fail-safe engineering
•
in S7-300 and S7-400
Includes monitoring and response time calculations for S7 Distributed Safety and
•
S7 F/FH F-systems
S7 F/FH Automation Systems
The
commission an S7 F/FH F-system.
S7-400, M7-400 Programmable Controllers Hardware and Installation
The
•
describes the installation and assembly of S7-400 systems.
S7-400H Programmable Controllers, Fault-Tolerant Systems
The
•
the CPU 41x-H central modules and the tasks involved in setting up and
commissioning an S7-400H fault-tolerant system.
CFC for S7 Continuous Function Chart
The
•
of programming with CFC.
The following elements are described in the
Programming
manual and online help:
Configuration of the fail-safe CPU and the fail-safe I/O
•
Programming of the fail-safe CPU in fail-safe FBD or LAD
•
Depending on which F-CPU you use, you will need the following documentation:
The operating manual
•
configuration, installation, addressing and commissioning of S7-300 systems.
CPU 31xC and CPU 31x, Technical Data
The
•
functions of the CPU 315F-2 DP and PN/DP and the CPU 317F-2 DP and PN/DP.
Automation System S7-400 CPU Specifications
The
•
functions of the CPU 416F-2.
ET 200S IM 151-7 CPU Interface Module
The
•
IM 151-7 CPU.
A separate product information bulletin is available for each applicable F-CPU. The
•
product information bulletins describe only the deviations from the corresponding
standard CPUs.
Configuring Hardware and Communication Connections with STEP 7 V5.x
The
•
describes the operation of the standard tools of STEP 7.
System Software for S7-300/400 System and Standard Functions
The
•
manual describes functions for distributed I/O access and diagnostics.
Describes the operation of
•
Contains information about how to configure and assign parameters for modules and
•
intelligent slaves with
Contains a description of the programming languages FBD and LAD
•
Describe how to operate the
•
with fail-safe modules is integrated in a higher-level control system).
manual describes the tasks that must be performed to
manual/online help provides a description
S7 Distributed Safety, Configuring and
S7-300, CPU 31xC and CPU 31x: Configuration
product manual describes the standard
manual describes the standard
STEP 7
standard tools
HW Config
PCS 7
process control system (required when ET 200S
manual
manual describes
describes the
manual describes the standard
reference
Preface
manual
v