Siemens SIMATIC ET 200S Installation And Operating Manual page 186

Index
Causes of faults
EM 4/8 F-DI DC24V PROFIsafe, 7-75
PM-D F DC24V PROFIsafe, 7-44
PM-E F pp DC24V PROFIsafe, 7-33
CE approval, 6-2
Changes
in this manual, iii
Channel
deactivated, 5-1
Channel fault, 5-2
Channel group fault, 5-1
Channel-specific diagnostics
as of byte 8 in the diagnostic data, A-7
of F-modules, 5-5
Climatic conditions
approved, 6-13
Commissioning
of ET 200S, 1-5
Communication error, 4-4, 5-6
EM 4 F-DO DC24V/2A PROFIsafe, 7-90
EM 4/8 F-DI DC24V PROFIsafe, 7-74
F-DI Module Reaction, 5-2
PM-D F DC24V PROFIsafe, 7-43
PM-E F pm DC24V PROFIsafe, 7-17
PM-E F pp DC24V PROFIsafe, 7-32
Conditions
for safety class with EM 4 F-DO DC24V/2A
PROFIsafe, 7-80
For safety class with EM 4/8 F-DI DC24V
PROFIsafe, 7-47, 7-55
for safety class with PM-D F DC24V
PROFIsafe, 7-38
for safety class with PM-E F pm DC24V
PROFIsafe, 7-3
for safety class with PM-E F pp DC24V
PROFIsafe, 7-25
Of use, 6-12
Transport and storage of F-Modules, 6-11
Conditions of use, 6-12
Configuration
ET 200S with F-motor starters, 2-2
F-System with ET 200S, 2-1
Configuration example
Voltage Group, 2-1
with F-motor starters:, 2-2
Configuration rules
F-potential groups, 2-2
Configuring
F-modules, 2-8
Connecting
two relays on one digital output, 7-13
Connecting capacitive loads, 7-15, 7-88
Index-2
Connecting grounded loads
With EM 4 F-DO DC24V/2A PROFIsafe, 7-81
with PM-E F pm DC24V PROFIsafe, 7-6
Connection to Common Potential
power modules, 2-3
Conventions
in this manual, vi
Corrective Measures
EM 4 F-DO DC24V/2A PROFIsafe, 7-91
EM 4/8 F-DI DC24V PROFIsafe, 7-75
PM-D F DC24V PROFIsafe, 7-44
PM-E F pm DC24V PROFIsafe, 7-18
PM-E F pp DC24V PROFIsafe, 7-33
Cross Circuit
EM 4 F-DO DC24V/2A PROFIsafe, 7-86
PM-E F pm DC24V PROFIsafe, 7-13
CSA Approval, 6-2
cULus approval, 6-3
Current carrying capacity
maximum, 2-7
D
Dark Period
of actuators, 4-7
Deactivated channel, 5-1
Determining parameter length
F-modules, 2-6
Determining parameter length, 2-6
diagnostic data
Byte 7 for EM 4/8 F-DI DC24V PROFIsafe, A-4
Byte 7 for PM-D F DC24V PROFIsafe, A-6
Byte 7 for PM-E F pm DC24V PROFIsafe, A-5
Byte 7 for PM-E F pp DC24V PROFIsafe, A-5
Byte 7 in EM 4 F-DO DC24V/2A PROFIsafe, A-5
Bytes 0 and 1, A-3
Bytes 2 and 3, A-3
Bytes 4 to 6, A-4
Position in message frame, A-2
Structure and contents, A-2
Diagnostic functions
PM-D F DC24V PROFIsafe, 7-42, 7-43
PM-E F pm DC24V PROFIsafe, 7-17
Diagnostic Functions, 5-3
can be activated by user, 5-4
cannot be activated by user, 5-3
EM 4 F-DO DC24V/2A PROFIsafe, 7-90
EM 4/8 F-DI DC24V PROFIsafe, 7-74
PM-E F pp DC24V PROFIsafe, 7-32
PM-E F pp DC24V PROFIsafe, 7-32
Reading out, 5-7
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04