Siemens SIMATIC ET 200S Installation And Operating Manual page 138

Fail-Safe Modules
7.5 4/8 F-DI VDC24V PROFIsafe Digital Electronic Module
Electrical isolation
•
•
•
•
Permissible potential difference between
•
•
•
Isolation in the series tested with
•
•
•
Isolation in the type test tested with
•
•
•
•
Current consumption
•
•
Power dissipation of the module
Status, Interrupts, Diagnostics
Status display
Inputs
Sensor supply
Diagnostic Functions
•
•
Sensor Supply Outputs
Number of outputs
Output voltage
•
Output current
•
•
Permissible aggregate current of outputs
Short-circuit protection
•
7-78
Between channels and backplane bus
Between channels and power supply
Between channels
Between channels/power supply and shield
Shield and ET 200S bus connection
Shield and I/O (DIs, P1/P2 buses)
ET 200S bus connection and I/O (DIs, P1/
P2 buses)
Shield and ET 200S bus connection
Shield and I/O (DIs, P1/P2 buses)
ET 200S bus connection and I/O (DIs, P1/
P2 buses)
Shield and ET 200S bus connection
Shield and I/O (DIs, P1/P2 buses)
ET 200S bus connection and I/O (DIs, P1/
P2 buses)
Impulse current test between ET 200S bus
connection and I/O (DIs, P1/P2 buses)
From backplane bus
From load voltage L+ (without load)
Group fault display
Diagnostic information can be displayed
Loaded
Rated value
Permissible range
Operating value
Technical Specifications
Yes
No
No
Yes
75 VDC/60 VAC
75 VDC/60 VAC
250 VAC
500 VDC/1 min or 600 VDC/1 s
500 VDC/1 min or 600 VDC/1 s
1500 VAC/1 min or 2545 VDC/1 s
350 VAC/1 min
350 VAC/1 min
2830 VAC/1 min
6000 VDC/5 positive and 5 negative pulses
28 mA, typical
120 mA, typical
4 W, typical
Green LED per channel
Red LED per channel
Red LED (SF)
Possible
2
Minimum L+ (-1.5 V)
300 mA
0 mA to 300 mA
600 mA
Yes, electronic
0.7 A to 1.8 A
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04