Siemens SIMATIC ET 200S Installation And Operating Manual page 191

PROFIsafe address setting
when replacing a module, 4-5
Proof-Test Interval, 4-6, 7-54
for fail-safe performance characteristics, 7-1
Protection class, 6-14
Protective conductor bus, 2-3
P-Switch, 7-30
Pulse-shaped interference, 6-7
Purpose of this Manual, iii
PWR LED, 5-4
PM-D F DC24V PROFIsafe, 7-42
PM-E F pm DC24V PROFIsafe, 7-17
PM-E F pp DC24V PROFIsafe, 7-32
R
Radio interference
emission of, 6-11
Readback Time
EM 4 F-DO DC24V/2A PROFIsafe, 7-88
PM-E F pm DC24V PROFIsafe, 7-15
Reading out
Diagnostic Functions, 5-7
Recycling, vi
Reduction
of vibrations, 6-12
Reintegration
Fail-Safe Module, 5-2
relay output
PM-E F pm DC24V PROFIsafe, 7-12
PM-E F pp DC24V PROFIsafe, 7-30
Relays, two
on one digital output, 7-86
Requirements
sensors and actuators, 4-6
Response time
Definition, D-1
F-Modules, D-1
S
S7 Distributed Safety
example configuration, 1-3
Optional package, 1-4, 2-8
S7 F Systems
Optional package, 2-8
Safe functional extra low voltage, 4-2
Safe shutdown, 2-5
Safe state, 5-1
Safety class (AK)
achievable, 1-4
Safety function
Parameter Assignment, 1-4
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Safety Integrity Level, 7-54
achievable, 1-4, 2-5
achieve with PM-E F pm DC24V PROFIsafe, 7-3
achieved with EM 4 F-DO DC24V/2A
PROFIsafe, 7-80
Achieved with EM 4/8 F-DI DC24V
PROFIsafe, 7-55
achieved with PM-D F DC24V PROFIsafe, 7-38
Achieving with EM 4/8 F-DI DC24V
PROFIsafe, 7-47
Achieving with PM-E F pp DC24V
PROFIsafe, 7-25
Safety Mode, 3-3
Safety-related shutdown, 5-6, 7-26
EM 4 F-DO DC24V/2A PROFIsafe, 7-90
PM-E F pm DC24V PROFIsafe, 7-17
PM-E F pp DC24V PROFIsafe, 7-32
Standard DO modules, 7-4
Saving faults, 5-1
Scope
Of this manual, iii
Sensor evaluation
EM 4/8 F-DI DC24V PROFIsafe, 7-60, 7-63,
7-67, 7-70, 7-72
Sensor Evaluation
EM 4/8 F-DI DC24V PROFIsafe, 7-51
EM 4/8 F-DI DC24V PROFIsafe, 7-57
Sensor interconnection
1-channel, 7-51
2-channel equivalent, 7-51
2-channel, non-equivalent, 7-51, 7-71
EM 4/8 F-DI DC24V PROFIsafe, 7-51, 7-63,
7-67, 7-72
Sensor signal
Requirement for duration, 4-7
Sensor supply
EM 4/8 F-DI DC24V PROFIsafe, 7-58, 7-60,
7-69
Sensor Supply
EM 4/8 F-DI DC24V PROFIsafe, 7-56
EM 4/8 F-DI DC24V PROFIsafe, 7-57
internal, 7-52
Sensor voltage missing, 5-6
Sensors
externally supplied, 4-2
Requirements, 4-6
Service & Support
In the Internet, vii
setting
PROFIsafe address switch, 3-3
Index
Index-7