Specifying A Setting For Special Paper - Konica Minolta bizhub C200 User Manual

Copy paper/originals
7
Specify the X and Y sides of the paper, and then touch [OK].
– Touch either [X] or [Y], and then use the keypad to type in the size.
– Do not enter the same size for "X" and "Y".
– If the value was incorrectly entered, press the [C] (clear) key in the keypad to erase the value, and
then specify the correct value.
8
Touch [OK], and then touch [OK] in the next two screens that appear.
Note
The selected size button is programmed with the entered paper size, so that the paper size is available
to be selected again without being typed in. In addition, the size can be changed.
6.2.6

Specifying a setting for special paper

If paper other than plain paper, such as OHP transparencies or special paper, is loaded in a paper tray, be
sure to change the paper type setting for that tray.
The following procedure describes how to specify the setting for special paper loaded into tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
C200
6
6-14