Displaying The User Management Screen - Konica Minolta bizhub C200 User Manual

Utility mode
11.3.9

Displaying the User Management screen

The following procedure describes how to display the User Management screen.
1
Press the [Utility/Counter] key.
2
Touch [User Management].
– If the software switch settings have been set to limit registering one-touch dial destinations (mode
477), [One-Touch/Box Reg.] and [Print Lists] do not appear. For details on the software switch
settings, refer to the User's Guide [Network Administrator].
– If "Account Track" in the Authentication Settings screen has been set to "ON" and the
[Utility/Counter] key is pressed without a user being logged on with an account, only [Admin.]
appears.
The User Management screen appears.
Note
To finish specifying settings in the Utility mode, touch [OK] in each screen until the screen for the Copy
or Fax/Scan mode appears.
C200
11
11-11