3
3.20.6
Specifying a setting for special paper
If paper other than plain paper, such as OHP transparencies or special paper, is loaded in a paper tray, be
sure to change the paper type setting for that tray.
The following procedure describes how to specify the setting for special paper loaded into tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for tray 1.
–
To specify a setting for special paper for tray 2/3/4 or the bypass tray, touch the button for the
corresponding paper tray.
–
If a setting for special paper is selected for a paper tray, that tray is not selected automatically with
the "Auto" Paper setting. However, if the paper cannot be used for double-sided printing and the
"Single Side Only" setting is selected for the paper tray, that tray is given priority.
–
The auto tray switch feature applies only to paper trays specified with the same paper type setting.
3
Touch [Change Tray Settings].
3-94
Copy Operations
bizhub C203/C253/C353