Specifying A Setting For Special Paper - Konica Minolta BIZHUB C203 User Manual

3
3.21.6

Specifying a setting for special paper

If paper other than plain paper, such as OHP transparencies or special paper, is loaded in a paper tray, be
sure to change the paper type setting for that tray.
The following procedure describes how to specify the setting for special paper loaded into tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for tray 1.
–
–
–
3
Touch [Change Tray Settings].
3-106
Downloaded From ManualsPrinter.com Manuals
To specify a setting for special paper for tray 2/3/4 or the bypass tray, touch the button for the
corresponding paper tray.
If a setting for special paper is selected for a paper tray, that tray is not selected automatically with
the "Auto" Paper setting. However, if the paper cannot be used for double-sided printing and the
"Single Side Only" setting is selected for the paper tray, that tray is given priority.
The auto tray switch feature applies only to paper trays specified with the same paper type setting.
Copy Operations
bizhub C353/C253/C203 (FE2)