Additional copy operations
2
After checking the settings, touch [OK] or press the [Mode Check] key.
The Basic screen appears again.
!
Detail
There are four Check Job Details screens. The number of the currently displayed screen appears to the
left below of the screen. Touch [↓] or [↑] until the desired screen is displayed.
3.1.2
To change the settings
1
Press the [Mode Check] key.
The Check Job Settings screen appears.
2
Touch [↑] or [↓] until the button for the function to be changed is displayed.
3
Touch the button for the function whose setting is to be changed.
The screen for specifying the setting appears.
4
Follow the appropriate procedure to change the setting.
C200
3
3-3