Konica Minolta bizhub C200 User Manual page 17

Before making copies
No. Part name
8 Paper feed cabinet PC-104
9 Paper feed cabinet PC-204
10 Paper feed cabinet PC-405
11 Desk DK-504
12 Job separator JS-505
13 Assist handle AH-101
14 Fax kit FK-507
15 Fax multi line ML-504
16 Stamp unit SP-503
17 Spare TX marker stamp MS-
*2
501
18 Expanded memory unit EM-
*2
310
*1
Parts marked in this way are not shown in the illustration.
*2
Parts marked in this way are internal options and therefore are not shown in the illustration.
Reminder
To keep the features and quality of the machine, use the desk or paper feed cabinet to place the
machine on the floor.
C200
Description
The top drawer can be loaded with up to 500 sheets of paper, and the bottom
drawer can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.
Both the top and bottom drawers can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
Can be loaded with up to 2,500 sheets of paper.
Referred to as the "LCT" throughout the manual.
Allows this machine to be set up on the floor.
Referred to as the "desk" throughout the manual.
When installed onto the output tray, it can be used for separating printed pag-
es.
Referred to as the "separator" throughout the manual.
*1
Used to close the original cover or the ADF.
*2
Allows this machine to be used for faxing.
*2
Allows expansion of the telephone lines for faxing.
*2
Applies a stamp to documents that have been scanned.
For details, refer to the User's Guide [Network Scan/Fax/Network Fax Opera-
tions].
Used to replace the stamp in the stamp unit.
Allows the memory to be expanded by 512 MB.
This is necessary for using the printer functions for double-sided printing, se-
cure printing, sorting printed pages and direct printing from a PDF file, for
scanning documents with the TWAIN driver without compressing the data, and
for shifting printed pages when the separator is installed.
1
1-3