Routine Maintenance; Testing The Console - Avaya definity Operation Manual

Routine maintenance

Routine testing and cleaning for your console is quite simple. This chapter
provides step-by-step procedures for testing your console, describes cleaning
procedures, and discusses what you need to do in the case of a power outage.

Testing the console

It is important for you to test your console's display and console lamps weekly. If
a problem occurs with the display or one of the lamps, notify your system
manager.
To test the display and the lamps on a 302A/B console:
1. Open the panel on the front of the console (see
2. Press and hold the lamp test switch (located at the left front of the console).
The following should occur:
3. Release the Lamp Test switch.
4. Close the panel.
5. If needed, press
All lamps in the display should light for 2 seconds.
Each row of lamps on the console and the selector console should
light and go dark in sequence from top to bottom.
The timed-reminder tone (high-pitched, 0.5 second tone) sounds.
Lamps return to their former state.
The timed-reminder tone silences.
to return to normal mode.
POS BUSY
6
Figure 1 on page 5).
Issue 5 July 2001 81