Rear Panel - Roland XP-60 Owner's Manual

Rear panel

POWER
AC
Power switch
Press to turn the power on/off.
AC inlet
Connect the AC power cable (included) to this inlet.
With units rated for 117V operation, the AC cable is
already connected to the unit.
CONTROL PEDAL
4 3 2 1 HOLD
CONTROL PEDAL 1–4 jacks
You can connect the expression pedals (EV-5; sold sep-
arately) to these jacks. By assigning a desired function
to a pedal, you can use it to select or modify sound or
perform various other control. You can also connect
optional pedal switches to sustain sound (p.92).
HOLD jack
An optional pedal switch can be connected to this jack
for use as a hold pedal.
MIDI connectors
These connectors can be connected to other MIDI
devices to receive and transmit MIDI messages.
CLICK OUT
DIRECT
LEVEL OUTPUT R
CLICK OUT LEVEL knob
Adjusts the level of the click sound to be output to
external devices (p.180).
CLICK OUT OUTPUT jack
Connect a cable to this jack when sending clicks to
external devices (p.180).
OUTPUT DIRECT R jack, OUTPUT DIRECT L jack
These jacks output only the direct sound (no effects
applied) or EFX'd sound in stereo.
MIDI
THRU OUT
OUTPUT
MIX
L R L
OUTPUT MIX R jack, OUTPUT MIX L jack
These jacks output the audio signal to the connected
mixer/amplifier system in stereo. For mono output,
use the L jack.
PHONES jack
An optional set of headphones can be connected to
this jack. Make sure that your headphones have an
impedance of 8–150 ohms.
IN
PHONES
17