Download Print this page

Connecting Equipment (Rear Panel); Turning The Power On/Off; Adjusting The Volume - Roland FP-10 ACR Owner's Manual

Advertisement

Connecting Equipment (Rear Panel)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
For details about the USB FOR UPDATE port and the USB
COMPUTER port, refer to the "Reference manual" (PDF).
* Never insert or remove the USB flash drives while this unit is
turned on. Doing so may corrupt the unit's data or the data
on the USB flash drives.
DC In Jack
Connect the included AC adaptor here.
Place the AC adaptor so that the side with text
is downward.

Turning the Power On/Off

Press the [L] (power) button to turn on the power.
If you hold down the [L] (power) button for one second or longer, the
power turns off.
Making the Power Automatically Turn Off After
a Time (Auto Off)
The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function). If you do not want the power to be turned off
automatically, disengage the Auto Off function.
* Auto-off settings are automatically saved in this unit.
C7
1
Hold down
Auto off
5 Any settings that you are in the process of editing will be lost
when the power is turned off. Before turning the power off, save
the data that you want to keep ("Reference manual" (PDF) "Saving
the Settings (Memory Backup)").
5 To restore power, turn the power on again.
Power Cord
AC Outlet
10 minutes, 30 minutes, 240
minutes, Disabled (stay on)
(default: 30 minutes)
Phones Jack
Connect stereo mini-type
headphones or speakers
here.

Adjusting the Volume

Use the two [VOLUME] buttons to adjust the volume.
[VOLUME] (right) button
[VOLUME] (left) button
You can adjust the speaker volume when using the built-in speakers,
or the headphones volume when headphones are connected.
* The number of indicators lit above the [VOLUME] buttons changes
according to the volume setting. If all indicators are lit, the volume
is at its maximum. If all indicators are unlit, there will be no sound.
2
Before You Play
PEDAL Jack
Connect the included pedal
switch or a separately sold
DP-10 damper pedal here.
Increases the volume.
Decreases the volume.
3

Advertisement

loading