Quick Reference Of Displays - Roland XP-60 Owner's Manual

Quick reference of displays

XP-80 displays are configured based on the following structure. To call up the display you desire, press the relevant buttons as
follows:
Patch mode [PATCH]
Play display
Playing a Patch (p.26)
232
[F1] (General) Naming a Patch and setting its volume level, panning, etc.
[F2] (Control) Setting Key Assign, Portamento, etc.
[F3] (Struct) Setting how Tones are combined (structure)
[F4] (K.Range) Setting the keyboard range
[F5] (V.Range) Setting the velocity range
[F1] (WG Prm) Setting Wave, Tone delay, etc.
[F2] (Pitch) Setting the pitch
[F3] (Pch Env) Setting the pitch envelope
[F1] (TVF Prm) Modifying sound's brightness using a filter
[F2] (TVF Env) Setting the TVF envelope
[F1] (TVA Prm) Setting volume level, panning, etc. of each Tone
[F2] (TVA Env) Setting the TVA envelope
[F1] (LFO 1) Modulating sound with vibrato and tremolo
[F2] (LFO 2) Modulating sound with vibrato and tremolo
[F3] (Control) Altering sound using controllers
[F4] (Ctrl Sw) Setting how MIDI messages are received
[F1] (General) Setting effects routing
[F2] (EFX Prm) Setting EFX parameters
[F3] (EFX Ctl) Modifying EFX using controllers
[F4] (Chorus) Setting chorus parameters
[F5] (Reverb) Setting reverb parameters
[F1] (System) Setting Local Switch, Patch Rx-Ch and Patch Tx-Ch
[F2] (Tx P.C) Transmitting Program and Bank Select numbers to external MIDI devices
Displaying the Patch list (Sound List window)
Quick reference of displays
Pressing [F1] (Common)
Pressing [F2] (WG)
Pressing [F3] (TVF)
Pressing [F4] (TVA)
Pressing [F5] (LFO&Ctl)
Pressing [F6] (Effects)
Pressing [LOCAL/TX/RX]
Pressing [SOUND LIST]
(p.46)
(p.47)
(p.49)
(p.50)
(p.50)
(p.51)
(p.52)
(p.53)
(p.54)
(p.54)
(p.55)
(p.56)
(p.57)
(p.57)
(p.58)
(p.59)
(p.60)
(p.74)
(p.63)
(p.64)
(p.64)
(p.90)
(p.182)
(p.27)