Roland XP-60 Owner's Manual page 25

7 S T U
4 J K L
1 A B C
Each time you press a numeric key, the display will cycle
through the characters and numerals printed above each
key. For instance, pressing [1] will make the display change
1→A→B→C→1→A... To specify lowercase characters, hold
down [SHIFT] and press the numeric key.
Repeat steps 1 and 2 as necessary.
If you enter a space in filenames or volume labels, it
will be replaced with an underline "__" after the oper-
ation is executed. However, a blank entered at the end
of a name will be left as a blank.
Assigning a name using a Name window
You can use a Name window to assign a name. As the Name
window displays a list of characters that can be entered, you
can quickly select a desired character.
<Procedure>
From any display in which you can assign a name,
press the following buttons to open a Name window.
Name
Patch
Performance
Rhythm Set
Song
Pattern
Filenames and volume labels
Press [F3] (←Prev) or [F4] (Next→) to move the cursor
to the location where you wish to input a character.
Press cursor buttons or [INC]/[DEC], or turn the
VALUE dial to specify the character.
To enter a space at the cursor position, press [F5] (Insert).
To delete the character at the cursor position, press [F6]
(Delete).
Repeat steps 2 and 3 as necessary.
After assigning a name, press [EXIT] or the button you
used to open the Name window to close it.
8 V W X 9 Y Z !
5 M N O 6 P Q R
2 D E F 3 G H I
0 SPACE
Button
[F1] (General)
[F1] (Common)
[F1] (Common)
[F1] (SngName)
[F2] (PtnName)
[F1] (Name)
Chapter 1. An overview of the XP-80
25