Roland XP-60 Owner's Manual page 77

Low Gain
Adjust the low frequency gain.
High Gain
Adjust the high frequency gain.
Pan (Output pan) #
Adjust the stereo location of the output sound. L64 is far left,
0 is center, and 63R is far right.
Level (Output level) #
Adjust the output level.
10: LIMITER
The Limiter compresses signals that exceed a specified vol-
ume level, preventing distortion from occurring.
L in
Limiter
R in
Threshold (Threshold level)
Adjust the volume at which compression will begin.
Ratio (Compression ratio)
Adjust the compression ratio.
Release (Release time)
Adjust the time from when the volume falls below the
Threshold Level until compression is no longer applied.
Post Gain
Adjust the output gain.
Low Gain
Adjust the low frequency gain.
High Gain
Adjust the high frequency gain.
Pan (Output pan) #
Adjust the stereo location of the output sound. L64 is far left,
0 is center, and 63R is far right.
Level (Output level) #
Adjust the output level.
11: HEXA-CHORUS
Hexa-chorus uses a six-phase chorus (six layers of chorused
sound) to give richness and spatial spread to the sound.
L in
Balance D
Hexa Chorus
R in
Balance D
Pre Delay (Pre delay time)
Adjust the time delay from when the direct sound begins
until the processed sound is heard.
L out
Pan L
2-Band
EQ
Pan R
R out
L out
Balance W
Balance W
R out
Chapter 3. Creating your own sounds
Rate #
Adjust the rate of modulation.
Depth
Adjust the depth of modulation.
Pre Delay Deviation
Pre Delay determines the time from when the direct sound
begins until the processed sound is heard. Pre Delay
Deviation adjusts the differences in Pre Delay between each
chorus sound.
Depth Deviation
Adjust the difference in modulation depth between each
chorus sound.
Pan Deviation
Adjust the difference in stereo location between each chorus
sound. With a setting of 0, all chorus sounds will be in the
center. With a setting of 20, each chorus sound will be
spaced at 60 degree intervals relative to the center.
Balance (Effect balance) #
Adjust the volume balance between the direct sound and the
processed sound.
Level (Output level)
Adjust the output level.
12: TREMOLO-CHORUS
Tremolo Chorus is a chorus effect with added Tremolo
(cyclic modulation of volume).
L in
Balance D
Tremolo Chorus
R in
Balance D
Pre Delay (Pre delay time)
Adjust the time delay from when the direct sound begins
until the chorus sound is heard.
Chorus Rate
Adjust the modulation speed of the chorus effect.
Chorus Depth
Adjust the modulation depth of the chorus effect.
Chorus Phase
Adjust the spread of the chorus effect.
Tremolo Rate #
Adjust the modulation speed of the tremolo effect.
Tremolo Separation
Adjust the spread of the tremolo effect.
Balance (Effect balance) #
Adjust the volume balance between the direct sound and the
processed sound.
L out
Balance W
Balance W
R out
77