Changing A Sound During A Song - Roland XP-60 Owner's Manual

The recording destination will be the Phrase track of
the same number with the selected Part. When record-
ing volume data on another Phrase track, move the
cursor to "TRACK" and either turn the VALUE dial or
press [INC]/[DEC].
To fade a song in, set the slider to its lowest setting. To
fade a song out, set the slider to its highest setting.
Otherwise, raise the slider to an appropriate position.
Press [LEVEL] to light the indicator.
Start recording in the method you've specified for
"Count In."
Move the slider to adjust the volume level.
After completing volume adjustment, press [STOP/
PLAY] to end recording.
It is possible to simultaneously control volume for up
to four Parts. If you are using more Parts, copy the vol-
ume change data (Volume) using the Track Edit func-
tion, then change the MIDI channel to match the Part
setting.
If the song drags, use Data Thin in track editing to thin
out Expression data as necessary.

Changing a sound during a song

To change an instrument sound during a song, record the
Bank Select (MSB and LSB) and Program numbers at the
Song position where you want to change the sound.
Recording such data will make sure the song always plays
back with the selected sound.
If just the Program number is received, without the
Bank Select number, the sound within a specific group
such as PR-A and USER will change.
If you select another Patch/Performance/Rhythm Set
when recording a song, the Bank Select number and
Program number of the selected Patch/Performance/
Rhythm Set will automatically be recorded.
If you select another Patch/Performance/Rhythm Set
on the Realtime Rec Stand-by display (SEQ), the Bank
Select number and Program number of the Patch/
Performance/Rhythm Set will be recorded at the
recording start point.
Changing the Patch
Group Patch Number Bank Select Program number
USER 1–128
PR-A 1–128
PR-B 1–128
PR-C 1–128
GM 1–128
XP-A 1–128
XP-A 129–256
XP-B 1–128
XP-B 129–256
XP-C 1–128
XP-C 129–256
XP-D 1–128
XP-D 129–256
MSB LSB
80 0 1–128
81 0 1–128
81 1 1–128
81 2 1–128
81 3 1–128
84 0 1–128
84 1 1–128
84 2 1–128
84 3 1–128
84 4 1–128
84 5 1–128
84 6 1–128
84 7 1–128
Chapter 11. Getting the full potential of the XP-80
Changing the Performance
Group Performance
Number
USER 1–32
PR-A 1–32
PR-B 1–32
When selecting another Performance, the MIDI chan-
nel of the Bank Select number and Program number to
be recorded must match the Performance Ctrl-Ch para-
meter (SYSTEM/MIDI/MIDI Param 1) setting. To
change the Patch or Rhythm Set assigned to a Part,
match the MIDI channel (of the Bank Select number
and Program number to be recorded) with the Part's
MIDI channel. However, if the Performance Ctrl-Ch
parameter setting and the Part's MIDI channel corre-
spond to each other, the Performance Ctrl-Ch parame-
ter setting will take priority, selecting a new
Performance.
Changing the Rhythm Set
Group Rhythm set
Number
USER 1, 2
PR-A 1, 2
PR-B 1, 2
PR-C 1, 2
GM 1, 2
XP-A 1–128
XP-A 129–256
XP-B 1–128
XP-B 129–256
XP-C 1–128
XP-C 129–256
XP-D 1–128
XP-D 129–256
When selecting another Rhythm Set, match the MIDI
channel of the Bank Select number and Program num-
ber to be recorded to that of Part 10 of a Performance.
With the default setting, the MIDI channel of Part 10 is
set to 10.
<Procedure>
Call up the Microscope display (SEQ/Micro).
Press [u] or [d] to move ">" to the Song position at
which you want an instrument sound to change.
If that Song position is not on the display, move the cursor to
an appropriate Song position (measure-beat-clock) and spec-
ify the location using the numeric keys.
Press [F1] (Create) to call up the Create Event display
(SEQ/Micro).
Move the cursor to "Control Change".
Press [F6] (Execute).
Set CC# (Controller number) to 0, then specify Bank
Select MSB.
Repeat steps 3–5.
Set CC# (Controller number) to 32, then specify Bank
Select LSB.
Press [F1] (Create) to call up the Create Event display
(SEQ/Micro).
Move the cursor to "Program Change".
Press [F6] (Execute).
Input the desired Program number.
Bank Select Program
MSB LSB number
80 0 1–32
81 0 1–32
81 1 1–32
Bank Select Program
MSB LSB number
80 0 1, 2
81 0 1, 2
81 1 1, 2
81 2 1, 2
81 3 1, 2
84 0 1–128
84 1 1–128
84 2 1–128
84 3 1–128
84 4 1-128
84 5 1–128
84 6 1–128
84 7 1–128
181