Rudder Function; V-Tail - Fly Sky FS-i10 Instruction Manual

7.8 Rudder Function（Pic.37）
The rudder function is used for aircraft that have
2 rudders. Each rudder can set its own ratio to the
sticks movement.
For example if rudder
1 is set to 10% on the
up side, when the stick
is at 100% movement
in that direction, the
rudder will only move
10% of its full range of
motion.
Setup:
1. Touch the box in
either the [UP] or
[DOWN] columns
to select it.
2. Use the wheel
to change the
value. Repeat as
necessary until
both the up and
down side of both
rudders are set.
7.9
The V-tail function is used for planes that have no
elevators and has a V-tail rudder configuration.
The V-tail option will
only be visible in the
model setup menu
Pic.37
when both elevators
and rudders are not
ticked.
The V-tail function has
2 variables, elevator rate
and rudder rate, which
control how much
elevator and rudder are
applied when the sticks
are moved.
Setup:
1. Touch either
2. Use the wheel to
V-tail（Pic.38）
elevator rate or
rudder rate to
select it.
change the value.
Pic.38
29