Introduction; System Features - Fly Sky FS-i10 Instruction Manual

2. Introduction

The FS-i10 transmitter and FS-iA10B receiver constitute a 10 channel 2.4GHz AFHDS
Frequency Hopping Digital System Second Generation)
system supports fixed-wing, glider and helicopter.

2.1 System Features

The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation)
by FLYSKY is specially developed for all radio control models. Offering superior protection against interference
while maintaining lower power consumption and high reliable receiver sensitivity, FLYSKY's AFHDS technology
is considered to be one of the leaders in the RC market today.
Bidirectional Communication
Capable of sending and receiving data, each transmitter is capable of receiving data from
temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.
Multi-channel Hopping Frequency
This systems bandwidth ranges from 2.408GHz to 2.475GHz. This band is divided in 135
channels. Each transmitter hops between 16 channels
order to reduce interference from other transmitters
Omni-directional Gain Antenna
The high efficiency Omni-directional high gain antenna cuts down on interference, while using
less power and maintaining a strong reliable connection.
Unique ID Recognition System
Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver have
been paired, they will only communicate with each other, preventing other systems accidentally
connecting to or interfering with the systems operation.
Low Power Consumption
The system is built using highly sensitive low power consumption components, maintaining
high receiver sensitivity, while consuming as little as one tenth the power of a standard FM
system, dramatically extending battery life.
digital proportional computerized R/C system. This
(32 for Japanese and Korean versions)
2A(Automatic
developed and patented
in
3