System Interface; Home Screen; Status Bar - Fly Sky FS-i10 Instruction Manual

Digital proportional radio control system

5. System Interface

This chapter is an introduction to the menu and menu functions.

5.1 Home Screen

The home screen displays useful information about your model, including sensors and function status etc.
Model Name
Receiver Signal
Sensor Output
Mute
Throttle Cut
Enabled
Trainer Function
Enabled
Logic Switches
Enabled
Exponential
Function Enabled
Trim 1
Airplane/Helicopter
Structure
Trim 2
Help

5.1.1 Status Bar

12
Battery Full
Receiver Not Connected
External voltage sensor is chosen, but not connected.
Charged Charging
Currently selected model number and name.
Received signal strength. When 5 bars are displayed the signal is at full
strength, if the signal displays 2 or less the system will sound an alarm.
Full Low Battery (Charging Required)
FS-l10
Transmitter Battery
Status
Receiver Battery
Status
Flap Function
Enabled
Throttle Hold
Enabled
Butterfly Function
Enabled
Active Condition
Model Timer
Engine Timer
Trim 3
Multi Timer 1
Multi Timer 2
Trim 4
Settings