Digital proportional radio control system
3. Before Use
Before using the product please follow the guidelines below to install the battery and connect the device.
3.1 Transmitter battery Installation
Danger •
Only use specified battery.
Danger •
Do not open, disassemble, or attempt to repair the battery.
Danger •
Do not crush/puncture the battery, or short the external contacts.
Danger •
Do not expose to excessive heat or liquids.
Danger •
Do not drop the battery or expose to strong shocks or vibrations.
Danger •
Always store the battery in a cool, dry place.
Danger •
Do not use the battery if damaged.
To install the transmitters battery, follow these steps:
1.
Open the battery compartment.
2.
Insert fully charged battery into the battery compartment. Make sure that the metal contacts on the
battery and transmitter have a good connection.
3.
Replace the battery compartment cover.
8
FS-l10