System Settings; Blacklight Timeout: (Time); Backlight: (%); System Sound - Fly Sky FS-i10 Instruction Manual

Digital proportional radio control system
Hide thumbs Also See for FS-i10:
Table of Contents

Advertisement

10. System Settings

The menu system is used to set transmitter functions such as screen and audio settings.
10.1 Blacklight Timeout:
The blacklight timeout function controls how long the system will wait before turning off screens backlight.
Backlight time can affect the battery life of your system, the longer the time, the shorter the battery
will last.To change the backlight time enter the function and select the desired time from the list.
10.2 Backlight:
(%)
This function controls the backlight brightness. Note that increasing the brightness will reduce battery life.To
change the backlight brightness, move the wheel at the bottom of the screen to change the percentage.

10.3 System Sound

This function is used to toggle all system sounds, including power-on/power-off sounds, key sounds and so on.
The alarm sound is not included.To disable the system sounds, uncheck the box by touching it.

10.4 Alarm Sound

This function is used to toggle all alarm sounds.To disable the alarm sounds, uncheck the box by touching it.

10.5 Auto Power Off

This function powers off the system automatically after 2 minutes, unless a receiver is connected. To enable this
function, check the box by touching it.

10.6 Screen Calibration

If the touch screen is not functioning correctly, use this function to recalibrate. To recalibrate once inside the
function touch the center of the crosses as they appear on the screen. The system will exit the function once
calibration is complete.
It is recommended that you use the supplied stylus to calibrate the screen.

10.7 Units

This function is used to change between Metric and Imperial measurement systems.

10.8 USB Function

The system can be used with various computer based simulators via USB.
Setup:
1. To enable the simulator function select [FS-i10 emulator] from the menu.
2. To disable this function select [None].
When the emulator mode is active, the system cannot transmit data wirelessly.

10.9 Language

To change the system language simply touch the desired language.
(Time)
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents