Camera: Ptz - Swann PRO-SERIES HD Instruction Manual

Camera: PTZ

26-05-2015 9:30:15 Tue
If you have a compatible PTZ camera connected to the DVR, use the PTZ
controls to move the camera as well as the ability to zoom into an object
and to control the level of focus (if available). You can create multiple
Preset positions, which can be recalled to focus the camera's view to
a different position within the image. A Pattern can also be created to
record the camera's movement along a predefined path.
Preset:
A Preset is a particular position within the image that you would
like the camera to focus on. Up to 255 different Preset positions can be
created - see page 19 for more
Patrol:
Patrol mode instructs the DVR to automatically move the cam-
era according to the Preset positions that have been created. You can
increase or decrease the duration before moving to the next Preset po-
sition - see page 20 for more information.
Camera 01
information.
Consult the user manual included with your
camera then match those settings here.
Pattern: A Pattern is created by recording the camera's movements
along a predefined path. This gives you the flexibility to focus the cam-
era's view on multiple paths within the image automatically -
21 for more information.
Linear Scan:
A Linear Scan instructs the camera to move in a horizontal
motion - see page 22 for more
PTZ Settings:
Click this to configure the settings for your PTZ camera.
The DVR supports a number of different PTZ protocols. Consult the user
manual included with your camera then match those settings here.
Please note, the PTZ functions are dependent on the capabilities of your
camera and the protocol that it supports. Not all the functions available
will be compatible.
information.
see page
18