Controlling Your Ptz Camera - Swann PLATINUM DIGITAL HD Instruction Manual

Controlling your PTZ Camera

Back Yard 09/05/2017 04:30:15 PM
CH2
1 2
6 5
The 7450 series supports the Onvif protocol, allowing connection of non-
Swann PTZ compatible cameras (some functions may not be available).
Click for contents
3
4
To move the PTZ con-
trols, click and hold then
reposition it.
To control your PTZ camera, in Live View mode click on the channel the cam-
era is connected to then click the "PTZ" button located on the camera tool-
bar. The channel will go full screen and the PTZ controls will be visible (as
shown on the left).
1. If you have multiple PTZ cameras connected, click this to select a different
camera.
2.
Click this to start cruise mode (preset positions must be created first).
Cruise mode instructs your NVR to automatically move the camera accord-
ing to the preset positions that have been created. Click again to stop cruise
mode.
3.
Adjust the speed control to alter how fast or slow the camera will pan or
tilt. Move the slider to decrease or increase the speed.
4. Click this to access the Preset panel. This allows you to create multiple
preset positions and to access the camera's on-screen display. Click again
to close.
5.
This allows you to zoom into an object and to control the level of focus (de-
pending on the camera you have, the iris control may not be available).
6. Click the directional buttons to move the camera in the direction selected
(the middle button has no function).
For instructions on how to create a preset and to access the camera's on-
screen display (see page 32 - Creating a Preset).
31