Configuration: Exceptions
An Exception is any de-
viation from the DVR's
normal behaviour. The
DVR can alert you in
multiple
ways
such
as sending an email,
alerting you via the
SwannView Plus Win-
dows
software
and
activating its internal
buzzer.
Enable Event Hint:
When an Event occurs, a message will appear on-
screen. Click this if you wish to disable on-screen messages.
Event Hint Settings:
You can select which Event messages will appear
on-screen.
Exception Type:
Select the Event type you'd like the DVR to react to -
HDD Full:
As the name suggests, this Event occurs when the hard drive
has run out of space. This Event type becomes redundant as "Overwrite"
is enabled by default -
see page 25 for more
HDD Error:
When the DVR has difficulty accessing the hard drive.
Network Disconnected:
When the DVR has difficulty connecting to the
Internet.
IP Conflicted:
When the DVR detects a conflicting IP address.
Illegal Login:
Input/recording resolution mismatch:
not capable of matching the recording resolution selected.
Record Exception:
such as a hard drive failure or if the hard drive quota has been changed.
Audible Warning:
Alert CMS Software:
information.
ware that's installed on your computer.
Send Email:
• Don't forget to click "Apply" to save settings.
• Click the "Back" button to go back to the Menu.
When the DVR detects an incorrect login.
When the camera connected is
When there is one or more errors during capture
This will enable the DVR's internal buzzer.
This will alert the SwannView Plus Windows soft-
The DVR will send an email alert.
51