Camera: Motion - Swann PRO-SERIES HD Instruction Manual

Camera: Motion

Whether you're waiting
for an expected event,
hoping you don't spot
an unwelcome visitor,
or just curious about
what happens when
you're not around, Mo-
tion can be configured
to record video and to
alert you when move-
ment is detected.
Camera: Select a camera that you would like to edit.
Enable Motion Detection: Click the checkbox to enable.
Settings:
Here you can define what will happen when the camera you've
selected has detected movement -
Trigger Channel:
Select additional cameras to start recording.
Arming Schedule: Adjust your arming schedule by selecting a start day
and a time period (24-hour time). Use the "Copy" function to apply all
settings to the other cameras. Don't forget to click "Apply" to save set-
tings. Click "OK" to exit.
Linkage Action:
Options available are full screen monitoring, enabling
the DVR's internal buzzer, send alerts to the SwannView Plus Windows
software (software must be running to receive alerts) and to send an
26-05-2015 9:30:15 Tue
Camera 01
email. Don't forget to click "Apply" to save settings. Click "OK" to exit.
Sensitivity:
value between L (low) and H (high). The closer to H the slider is set, the
more sensitive the detection will be.
The entire view of the camera is enabled, however you can select certain
areas if you wish. Using the mouse, click the "Clear" button then click
and drag to select the area that you want to enable. To enable the entire
view of the camera, click the "Full Screen" button.
• Use the "Copy" function to apply all settings to the other cameras.
• Don't forget to click "Apply" to save settings.
• Click the "Back" button to go back to the Menu.
This setting is controlled by a slider, allowing you to set a
12