Camera: PTZ - Creating a Pattern
1.
Use the PTZ controls to move the camera to the desired start position.
The Zoom and Focus controls can also be used. You can use the Speed
control to determine how fast or slow the camera will move.
2.
Click the "Start" button to create a Pattern (only 1 pattern is support-
ed). As you move the camera to the desired areas within the image, the
DVR will record the exact movements that you make.
Stop:
Click this button when you have finished creating a Pattern.
Clear All:
Click this button to delete a Pattern.
PTZ:
Click this button to access the full PTZ controls available. To ac-
cess the Pattern function, click the triangle button until you reach the
"General" menu (see above). Click "Call Pattern" to start. The camera
will move to the start position and then move along its predefined path.
26-05-2015 9:30:15 Tue
2
Camera 01
1
Click the triangle button until you
reach the "General" menu.
Click "Stop Pattern" to stop.
Click the "X" button to close the PTZ controls when finished.
• Click the "Back" button to go back to the Menu.
21