Record: Parameters - Record - Swann PRO-SERIES HD Instruction Manual

Record: Parameters - Record

The Parameters func-
tion allows you to
change the resolution
and bitrate for each
camera connected. By
default the resolution
is 1920 x 1080 which
fits in with the capa-
bilities of the provided
cameras.
Camera: Select a camera that you would like to edit.
Stream Type: By default "Video" is selected. Select "Video & Audio" if
you have an audio source connected to the DVR's audio input.
Resolution:
The default resolution is 1920 x 1080.
Frame Rate:
The number of frames per second (fps) that the DVR will
record. The default is 12fps but can be changed to Full Frame when se-
lecting a lower resolution.
Video Quality: The amount of data the DVR will use to record video. Low-
ering the quality reduces the file size of each video saved.
Pre-record:
By default the DVR will record 5 seconds before an event
occurs. This reduces the chance of an event not being recorded. We rec-
ommend changing this to 10 seconds (10s).
Post-record: Same as above but the DVR will continue recording after
an event has occurred. 30 seconds (30s) is the recommended length.
Expired Time (day): Determines how long the video footage will remain
on the hard drive without it being overwritten.
Record Audio:
Click the checkbox to enable when selecting "Video &
Audio" for the stream type.
• Click the "Restore" button to revert back to default settings.
• Use the "Copy" function to apply all settings to the other cameras.
• Don't forget to click "Apply" to save settings.
• Click the "Back" button to go back to the Menu.
8