HDD: General
This function allows
you to initialize the
hard drive inside the
DVR. Initializing will
format the drive and
erase any data that is
on there. You also have
the option of adding a
NAS (network attached
storage) device that
the DVR can record to.
Add:
Create a folder on your NAS device to save to. Select "NAS", input
the IP address of your NAS device then click the "Search" button. If your
NAS device uses the iSCSI protocol select "IP SAN". Select the folder
that you created then click "OK" to continue.
Init:
Click the hard drive's checkbox to select then click this button to
format. A message will appear noting that all data will be erased. Make
sure you backup your hard drive if required before formatting. Click
"OK" to continue.
• Click the "Back" button to go back to the Menu.
Please note, the hard drive has been pre-formatted during manu-
facture. If adding a second drive, use the "Init" button to format.
61