Camera: Ptz - Swann pro-series hd Instruction Manual

Camera: PTZ

12-09-2016 Fri 09:30:15
If you have a compatible PTZ camera connected to your DVR, use the PTZ
controls to move the camera as well as the ability to zoom into an object and
to control the level of focus (if available). You can create multiple preset posi-
tions, which can be recalled to focus the camera's view to a different position
within the image. A patrol can also be used to move the camera to different
preset positions that have been created.
Preset:
A preset is a particular position within the image that you would like
the camera to focus on. Up to 255 different preset positions can be created -
see page 28 for more information.
Patrol:
Patrol mode instructs your DVR to automatically move the camera
according to the preset positions that have been created. You can increase or
decrease the duration before moving to the next preset position - see page
29 for more information.
Pattern:
This option has no function on this model DVR.
Click for contents
Camera 02
To configure PTZ devices, consult your camera's
manual then match those settings here.
Linear Scan:
This option has no function on this model DVR.
PTZ Parameter Settings:
Click this to configure the settings for your PTZ
camera. Your DVR supports a number of different PTZ protocols. Consult the
user manual included with your camera then match those settings here. Just
be aware, the PTZ functions are dependent on the capabilities of your camera
and the protocol that it supports. Not all the functions available will be com-
patible.
PTZ:
Click this button to access the full PTZ controls available.
· Click the "Back" button to go back to the Menu.
27