Camera: Video Loss - Swann PRO-SERIES HD Instruction Manual

Camera: Video Loss

Video Loss is regarded
as a potential alarm
event and is considered
to occur any time the
DVR doesn't receive an
active video signal on
any of its inputs. When
an input has no incom-
ing video signal, a "NO
VIDEO" message will
appear on-screen.
Camera: Select a camera that you would like to edit.
Enable Video Loss Alarm: Click the checkbox to enable.
Settings:
Here you can define what will happen when the camera you've
selected has no incoming video signal -
Arming Schedule:
Adjust your arming schedule by selecting a start day
and a time period (24-hour time). Use the "Copy" function to apply all
settings to the other cameras. Don't forget to click "Apply" to save set-
tings. Click "OK" to exit.
Linkage Action: Options available are full screen monitoring, enabling
the DVR's internal buzzer, send alerts to the SwannView Plus Windows
software (software must be running to receive alerts) and to send an
email. Don't forget to click "Apply" to save settings. Click "OK" to exit.
26-05-2015 9:30:15 Tue
Camera 01
• Use the "Copy" function to apply all settings to the other cameras.
• Don't forget to click "Apply" to save settings.
• Click the "Back" button to go back to the Menu.
16