Configuration: Network - Nat - Swann PRO-SERIES HD Instruction Manual

Configuration: Network - NAT

In most circumstances there is no need to change the settings here. The
following is for advanced users only.
Enable UPnP: Click the checkbox to enable.
HTTP Port:
This port is used to log into your DVR via your network or
remotely. The default port number (85) is seldom used by other devic-
es, however if you have another device using this port, you may need to
change it. An alternative port number to use is 90. Make sure that the
number used for the "External Port" and "Internal Port" both match,
otherwise the UPnP function will not work.
RTSP Port: This port is used to stream real-time images to your mobile
device. If you're having issues streaming video to your mobile device
or your mobile service provider is blocking access, we recommend to
change this to 5554. Do not change this if everything is working ok.
Server Port: This is the internal port that the DVR will use to send infor-
mation through. This particular port number (8000) is not used by many
devices, however if you have another DVR-like device, you may need to
change it. An alternative port number to use is 9000. Make sure that the
number used for the "External Port" and "Internal Port" both match,
otherwise the UPnP function will not work.
HTTPS Port:
Basically the same as HTTP Port but with an additional
layer of security. The default port number (443) is seldom used by other
devices. Make sure that the number used for the "External Port" and
"Internal Port" both match, otherwise the UPnP function will not work.
• Don't forget to click "Apply" to save settings.
• Click the "Back" button to go back to the Menu.
47