Exhaust Manifold - Suzuki GRAND VITARA XL-7 Owner's Manual

Hide thumbs Also See for GRAND VITARA XL-7:
Table of Contents

Advertisement

26) Upon completion of installation, verify that there is no fuel
leakage at each connection according to procedure
described in Section 6.

Exhaust Manifold

WARNING:
To avoid danger of being burned, do not service exhaust
system while it is still hot. Service should be performed
after system has cooled off.
1. Left (No.1) exhaust manifold
Right (No.2) exhaust manifold
2. Exhaust manifold cover
3. Exhaust No.1 pipe
A. Without WU-TWC
B. With WU-TWC
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove air cleaner upper case and intake air hose if right
side exhaust manifold is removed.
3) Detach couplers from their bracket and disconnect oxygen
sensor lead wires at couplers.
1. HO2S-1 (Green connector)
2. HO2S-2 (Black connector)
ENGINE MECHANICAL (H27 ENGINE) 6A2-9

Advertisement

Table of Contents
loading

Table of Contents