Magnet Clutch - Suzuki GRAND VITARA XL-7 Owner's Manual

Magnet Clutch

1. Armature plate bolt
2. Armature plate
3
4
5
(A)
3
2
5
1
3. Circlip
4. Magnet clutch
INSPECTION
Check the following items.
2
1
If any detects are found, repair or replace magnet clutch assem-
bly.
REMOVAL
1) Remove compressor from vehicle. Refer to "COMPRESSOR
2) Fix armature plate (1) with special tool and remove armature
1
3) Remove armature plate (1).
4) Remove shims from shaft.
7
6
3
4
8
5. Shim (s)
6. Magnet clutch coil
• Check no sigh of compressor oil leakage
• Check magnet clutch pulley bearing for noise and grease
leakage.
• Check magnet clutch operation as follows :
a) Connect battery (1) and ammeter (2) to compressor (3) as
shown.
b) Check that steadily locks between armature plate (4) and
magnet clutch pulley (5).
c) Check that ammeter (2) indicates specified current.
Specified current of magnet clutch :
4A MAX at 12V
ASSEMBLY" in this section.
plate bolt.
Special tool
(A) : 09920-53740
NOTE:
Do not reuse armature plate bolt.
AIR CONDITIONING (OPTIONAL) 1B-41
7. Compressor body assembly
8. Magnet clutch assembly