Master Cylinder Reservoir - Suzuki GRAND VITARA XL-7 Owner's Manual

5A-6 BRAKES PIPE/HOSE/MASTER CYLINDER
1
3
3
2
1
3

Master Cylinder Reservoir

REMOVAL
1) Disconnect reservoir lead wire at coupler.
2) Clean outside of reservoir (1).
3) Take out fluid with syringe or such.
4) Remove reservoir stopper (3).
2. Master cylinder
2
5) Remove reservoir (1).
1
NOTE:
3 Do not allow brake fluid to get on painted surfaces.
2. Stopper
3. Grommets
INSTALLATION
NOTE:
See NOTE at the beginning of this section.
1) When using new grommets, lubricate them with the same
fluid as the one to fill reservoir (1) with. Then press-fit grom-
mets to master cylinder (2). Grommets must be seated in
place.
2) Install reservoir (1) and then insert stopper (3).
2
3) Connect reservoir lead wire.
4) Fill reservoir (1) with specified fluid.
5) Upon completion of installation, check for fluid leakage.