Accelerator Cable Adjustment; A/T Throttle Cable Adjustment (A/T Vehicle) - Suzuki GRAND VITARA XL-7 Owner's Manual

6E2-14 ENGINE AND EMISSION CONTROL SYSTEM (SEQUENTIAL MULTIPORT FUEL INJECTION FOR H27 ENGINE)

Accelerator Cable Adjustment

1) With throttle valve closed, check accelerator pedal play
which should be within following specification.
If measured value is out of specification, adjust accelerator
cable (1) to specification with cable adjusting nut (2).
Accelerator pedal play "a":
2 – 5 mm (0.08 – 0.20 in.)
2) With accelerator pedal depressed fully, check clearance
between throttle lever (2) and lever stopper (1) (throttle body)
which should be within following specification.
If measured value is out of specification, adjust it to specifi-
cation by changing height of pedal stopper bolt (3).
Clearance "b" between throttle lever and lever stopper
(throttle body) (with accelerator pedal depressed fully):
0.5 – 2.0 mm (0.02 – 0.07 in.)

A/T Throttle Cable Adjustment (A/T Vehicle)

1) Make sure that accelerator cable is adjusted as specified.
2) With throttle valve closed, check clearance "c" which should
be within the following specification.
If it is out of specification, adjust A/T throttle cable (1) by
turning cable adjusting nut (2).
A/T throttle cable installing position specification clear-
ance "c":
0.8 – 1.5 mm (0.03 – 0.06 in.)