4B-2 PROPELLER SHAFTS
Front propeller shaft flange nuts
Rear propeller shaft flange nuts
Center support bolts
Material
Thread lock cement
On-Vehicle Service
Propeller Shaft
For the descriptions other than those mentioned below, refer to
the same item in the same section of the Service Manual men-
tioned in the FOREWORD of this manual.
INSTALLATION
Use the following specification to torque universal joint flange
nuts. For rear propeller shaft flange bolt, apply thread lock
cement to thread part of bolts if reused.
Tightening Torque Specification
Fastening part
Required Service Material
Recommended SUZUKI product
(Part Number)
THREAD LOCK CEMENT SUPER 1322
(99000-32110)
"A" : Cement 99000-32110
Tightening torque
Front propeller shaft flange nuts (a) :
50 N·m (5.0 kg-m, 36.5 lb-ft)
Rear propeller shaft flange nuts (a) :
60 N·m (6.0 kg-m, 43.5 lb-ft)
N•m
50
60
50
• Rear propeller shaft flange bolts
Tightening torque
kg-m
lb-ft
5.0
36.5
6.0
46.5
5.0
36.5
Use