Propeller Shaft - Suzuki Grand Vitara XL-7 Service Manual

4B-2 PROPELLER SHAFTS
TIGHTENING TORQUE SPECIFICATION
Front propeller shaft flange nuts
Rear propeller shaft flange bolts
ON-VEHICLE SERVICE

PROPELLER SHAFT

INSTALLATION
Reverse removal procedure to install propeller shaft.
D Use following specification to torque universal joint flange bolts
and nuts.
Tightening Torque
Front propeller shaft flange nuts:
50 N
Rear propeller shaft flange bolts (a):
60 N
D When installing propeller shaft, align the match marks.
Otherwise, vibration may occur during driving.
NOTE:
If transfer oil was drained for front propeller shaft removal,
pour specified gear oil into transfer case to specified level.
Fastener Fastener
.
m (5.0 kg-m, 36.5 lb-ft)
.
m (6.0 kg-m, 43.5 lb-ft)
.
N m
50
60
Tightening torque
kg-m lb-ft
5.0 36.5
6.0 43.5