Emergency Keys; Detector Reset - Interlogix zerowire User Manual

1.
YOUR 4 TO 8 DIGIT MASTER CODE
2.
3.
4.
5.

Emergency Keys

ZeroWire has three (3) emergency keys: Medical, Police (duress) and Fire.
If these keys are not lit, then the Emergency Keys are not available on your system. Check
with your service provider to clarify what responses will be provided upon activation.
Touch the required key for two seconds to activate that alarm. You should only touch
these keys in an emergency situation that requires a response by a central monitoring
station.
To cancel an emergency activation:
YOUR 4 TO 8 DIGIT MASTER CODE
6.

Detector Reset

Check with your installer if this feature is configured.
Detection devices, such as smoke detectors, shock sensors and some glass break
detectors, "latch" their alarm lights to indicate an alarm condition. The alarm will stay on
until it is reset by an authorized user. Use this menu to acknowledge and clear the alarm.
Example: Reset latching detectors that are in alarm:
1.
YOUR 4 TO 8 DIGIT MASTER CODE
2.
3.
ZeroWire User Manual
HISTORY
ENTER
2
MENU
ENTER
MENU 7
ENTER
MENU
Select History Menu.
Listen to history events.
Touch ENTER for next event.
Touch 0 for previous event.
Exits from History Menu.
Enter you code after an emergency key has
been activated.
Select main menu - Option 7, Detector Reset
Exits from Detector Reset Menu
9