App And Web Error Messages - Interlogix zerowire User Manual

The main controller for the security system. It stores all programming, provides
ZeroWire Panel network and other connectivity options for reporting, provides physical terminals for
connecting power, backup battery, zones, and outputs.
ZeroWire has a built-in web server which provides access to ZeroWire features via a
web browser interface or a native smartphone app.
ZeroWire Web
Server
This allows you to performing programming and control of the system without
needing to be physically in front of the ZeroWire keypad.
A detection device such as a Passive InfraRed motion zone (PIR), reed switch,
Zone smoke detector, panic button, etc. Zones may be physically wired to the ZeroWire
system. Also known as an input or sensor on other security panels.

App and Web Error Messages

Various error messages may appear in the ZeroWire Web Server and
UltraConnect App.
Advanced/Settings Configuration Menus
• "You must select a Menu before you can scroll" – An attempt was made to
scroll up or down from the top level menu.
• "Select a submenu from the list or select back to access the main menu" – An
attempt was made to scroll up or down from a submenu that has no additional
levels.
• "Defaulting requires 2 levels" – a Shortcut was entered without two levels.
Read Write errors and results
• "Write Access Denied"
• "Nothing displayed can be Saved"
• "Program Success!"
• "Name Saved"
Sensors Page
• "No Sensors Configured For Your Access" – Displayed on Sensors page
when there are no sensors available to view.
WiFi
• "Connection Was lost before a response was received" – Sent when No
response received on a WiFi network change.
Data Entry Errors
• "Data must only contain the following characters"
• "Date must be of the form YYYY–MM–DD."
• "Day must be from 1 to 31"
• "Data entry must only contain the numbers 0 – 9 and A–F"
38 ZeroWire User Manual