Interlogix zerowire User Manual page 14

If the Ready Light is flashing green then "forced arming" is enabled. This means some
zones are not secure but you can still arm your security system. Read more about the
Forced Arming Feature on the previous page.
You may arm your system by entering your user PIN code:
1.
2.
3. USER PIN CODE
4.
or if your service provider has enabled the quick arm feature, you can simply touch the
Stay key:
5.
6.
7.
If an armed zone is alarmed whilst your security system is in the Stay mode, it will sound a
warning tone on your ZeroWire and start a timer. At the end of the Stay Mode Entry Time
your sirens will sound. Your service provider predetermines this warning time at the time of
installation.
6
Ready Light
is green
STATUS
STAY
ENTER
EXIT DELAY BEEPS
STATUS
STAY
EXIT DELAY BEEPS
Touch
Stay
Downstairs only
protected
Check status key is green. Close all
protected doors and windows. If you
have motion detectors in your "stay
mode", have everyone leave those
areas.
Select the Away Mode.
Stay within the protected areas.
Check status key is green. Close all
protected doors and windows. If you
have motion detectors in your "stay
mode", have everyone leave those
areas.
Select the Away Mode.
Stay within the protected areas.
ZeroWire User Manual