Backup Light - Subaru legacy 2017 Owner's Manual

Hide thumbs Also See for legacy 2017:

Table of Contents

Maintenance and service/Replacing bulbs

Backup light

It may be difficult to replace the bulbs.

We recommend that you have the bulbs

replaced by your SUBARU dealer if

1. Open the trunk.

2. Remove the trunk trim lining by re-

moving the clips indicated in the illustra-

3. Turn the bulb socket counterclockwise

and remove it.

4. Pull the bulb out of the bulb socket and

replace it with a new one.

5. Install the bulb socket by turning it

6. Reconnect the electrical connector.

7. Reinstall the trunk trim lining.

1. Apply a flat-head screwdriver to the

light cover as shown in the illustration, and

pry the light cover off from the rear gate

Table of Contents

Outback 2017