Subaru legacy 2017 Owner's Manual page 118

ignition switch while the keyless ac-
cess function is switched to the non-
operational mode, refer to Access key
if access key does not operate
properly 9-18.
Radio waves used for the keyless
access with push-button start sys-
tem
The keyless access with push-button start
system uses radio waves of 134 kHz, in
addition to the radio waves used for the
remote keyless entry system. The radio
waves are periodically output from the
antennas installed on the vehicle as
shown in the following illustrations.
Keys and doors/Keyless access with push button start system
Legacy
1) Antenna
Outback
1) Antenna
CONTINUED
2-13