Light Control Switch - Subaru legacy 2017 Owner's Manual

3-46
Instruments and controls/Light control switch
Auto Headlights
. Light Sensitivity:
The operational sensitivity of the auto on/
off headlights can be set. You can select
Max , Mid , Low or Min .
. Wiper Link:
The automatic headlight turn on function
that is linked with the wiper operation can
be activated or deactivated. Select On to
activate. Select Off to deactivate.
Welcome Lighting
After entering the Welcome Lighting
menu, select either of the following me-
nus.
. Approaching Time Set:
The setting for the period of time in which
the low beam headlights remain on when
approaching the vehicle can be set or
customized. Select the preferred seconds
to customize the operation period. Select
Off to deactivate the welcome lighting
function when approaching.
. Leaving Time Set:
The setting for the period of time in which
the low beam headlights remain on when
exiting the vehicle can be set or custo-
mized. Select the preferred seconds to
customize the operation period. Select
Off to deactivate the welcome lighting
function when exiting.
Default Settings
Select Yes to use the menu screen to
restore customized settings to the factory
default settings. Select No to return to
the previous screen without restoring to
the factory default settings.

Light control switch

CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the off position. If the
vehicle is left unattended for a
long time with the light control
switch set to a position other
than the off position, the battery
may be discharged.
Models with keyless access with
push-button start system :
The light control switch operates when the
push-button ignition switch is in the ACC
or ON position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
Models without keyless access with
push-button start system :
The light control switch operates when the
key is inserted in the ignition switch.