Subaru legacy 2017 Owner's Manual page 286

Troubleshooting guide
Experience
Mismatch of time alignment - a user may hear
a short period of programming replayed or an
echo, stutter or skip.
Sound fades, blending in and out.
Audio mute condition when an HD2/HD3
multicast channel had been playing.
Audio mute delay when selecting an HD2/
HD3 multicast channel preset.
Text information does not match the present
song audio.
No text information shown for the present
selected frequency.
The Acquiring caution message appears
when the system attempts to acquire digital
transmission.
Cause
The radio stations analog and digital volume is
not properly aligned or the station is in ballgame
mode.
Radio is shifting between analog and digital
audio.
The radio does not have access to digital
signals at the moment.
The digital multicast content is not available until
TM
HD Radio broadcast can be decoded and
make the audio available. This takes up to 7
seconds.
Data service issue by the radio broadcaster.
Data service issue by the radio broadcaster.
When acquiring digital data while receiving a
digital broadcast and SPS station.
Audio/Audio set
Action
None, radio broadcast issue. A user can contact
the radio station.
Reception issue. May clear-up as the vehicle
continues to be driven. Turning the indicator of the
TM
HD Radio off will change the radio mode to
analog audio.
This is normal behavior, wait until the digital signal
returns. If out of the coverage area, seek a new
station.
This is normal behavior, wait for the audio to
become available.
Broadcaster should be notified. Complete the form;
www.ibiquity.com/automotive/report_radio
_station_experiences.
Broadcaster should be notified. Complete the form;
www.ibiquity.com/automotive/report_radio
_station_experiences.
.
When the reception in digital of the SPS station
is confirmed.
.
When the system determined that the SPS
station could not be received.
.
When the SPS broadcast is ended (stopped) by
the radio station while receiving SPS.
5-35
CONTINUED