Subaru legacy 2017 Owner's Manual page 231

3-76
Instruments and controls/Mirrors
new battery be placed in the
hand-held remote (garage door
opener remote) of the device for
quicker and more accurate train-
ing.
. Turn the ignition switch to the
ON or ACC position before
programming and/or operating
HomeLink .
®
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as
for future HomeLink
®
ming. It is also suggested that
upon the sale of the vehicle, the
programmed HomeLink
be erased for security purposes.
Refer to Erasing HomeLink
buttons 3-79.
Programming a New HomeLink
button
program-
1) Indicator Light
2) HomeLink
buttons
®
1. Press and release the HomeLink
button that you would like to program.
®
The HomeLink
orange slowly (if not, refer to Erasing
HomeLink buttons
®
®
buttons
®
®
indicator light will flash
®
3-79.
1) Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 inches (2 to 8
cm) away from the HomeLink
you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 inches
(15 to 20 cm). Keep this in mind if you
have difficulty with the programming
process.
button that
®