Initialization Of Power Window; Trunk Lid (Legacy) - Subaru legacy 2017 Owner's Manual

2-38
Keys and doors/Trunk lid (Legacy)
Operating the rear passenger s
windows
To open:
Press the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock switch on the power
window switch cluster, located on the
driver s side door, is in the lock position,
the passengers windows cannot be oper-
ated with the passengers switches.
Initialization of power win-
dow
If the vehicle s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function (driver s win-
dow)
. Anti-entrapment function (front passen-
ger s window - if equipped)
Initialize the power window in the following
procedure to reactivate such functions.
1. Close the driver s door.
2. Turn the ignition switch to the ON
position.
3. Open the driver s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed com-
pletely.
If the front passenger s window is
equipped with the auto-up/down function,
it is necessary to repeat the same
initialization procedure on that window
switch.

Trunk lid (Legacy)

WARNING
. To prevent dangerous exhaust
gas from entering the vehicle,
always keep the trunk lid closed
while driving.
. Help prevent children, adults or
animals from locking themselves
in the trunk. On hot or sunny
days, the temperature in the
trunk could quickly become high
enough to cause death or serious
heat-related injuries including
brain damage to anyone locked
inside, particularly for small chil-
dren.
. When leaving the vehicle, close
all windows and lock all doors.
Also make certain that the trunk
is closed.