Subaru legacy 2017 Owner's Manual page 390

Precondition
Fob start button is being pressed
User attempts to start engine by pressing fob
button twice within 3 sec
Engine idling by remote engine start operation
User attempts to stop engine by pressing and
holding fob button for at least 2 sec.
Starting and operating/Remote engine start system (dealer option)
Fob Indication
Flash
Continuous while button is
held down
1 flash 1 beep
2 flashes 2 beeps
1 flash every 3 sec
3 flashes 3 beeps
2 long flashes
1 flash every 3 sec
3 flashes 3 beeps
3 flashes 3 beeps
1 flash every 3 sec
Meaning
Beep
The fob is transmitting an RF signal
Engine start request received
Engine started successfully
Engine idling
Vehicle is in range but engine not started
Vehicle not in range (engine not started)
Engine idling
Engine stopped by system timeout or for safety
reasons (see sections above)
Engine stopped by user request
Stop request not received. Engine still idling.
7-19
CONTINUED