Paxar 9402 Reference Manual page 68

T12. alignment
T13. char rot
T14. field rot
3-6 Defining Fields
Field placement in the packet is an important consideration
when using field color attributes, because fields are imaged in
the order they are received. If a line field is defined before
the overlay (text or constant text) field, the line field is
blocked out by the overlay field, depending on the overlay
field's color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field's color attribute.
Options:
L Align on left side of field.
C Center text within field (monospaced fonts only)
R Align on right side of field (monospaced fonts only)
B Align at midpoint of field
E Align at endpoint of the field
Use L, B, or E for any font.
Character rotation. The field or supply does not rotate, only
the characters do. Options:
Top of character points to top of field
0
(Use for scalable font)
Top of character points to left of field
1
2 Top of character points to bottom of field
3 Top of character points to right of field
NOTE: Font 50 and downloaded TrueType fonts do not
support character rotation.
Field rotation. Field rotation rotates the whole field, not just
the characters. Rotation is affected by the pivot point, which
varies depending on how text is justified. Lower left corner of
field is the pivot point. Options:
0 Top of field points to top of supply
1 Top of field points to left of supply
2 Top of field points to bottom of supply
3 Top of field points to right of supply