Making Print Adjustments; Defining The System Setup Packet - Paxar 9402 Reference Manual

M a k i n g P r i n t A d j u s t m e n t s
You can adjust where the printer prints on your supply by
adjusting the supply, print, or margin positions. However, keep in
mind the following:
N
Supply adjustments across the width of your supply, such as
the margin position, are based in dots- either 203 dpi or 300
dpi, depending on your printhead density.
N
Supply adjustments for the length of your supply, such as
supply position or print adjustment, are always measured in
1/203 of an inch, regardless of your printhead density.
D e f i n i n g t h e S y s t e m S e t u p P a c k e t
Use the system setup packet (A) to select the power up mode,
display language, print separators between batches, print a
"slashed zero," and select the symbol set.
Syntax
A1. A System Setup Packet
A2. powup_mode Online Mode. Options:
A3. language Display Language. Options
NOTE: Options 4-12 are not available on the 9403 printer.
{I,A,powup_mode,language,sep_on,slash_zero,
symbol_set p}
0 online mode (default)
1 offline mode (9403/985x/9860)
0 English (default)
1 French
2 German
3 Spanish ES
4 Japanese
5 Portuguese
6 Italian
7 Swedish
8 Spanish2 - MX
9 Danish
10 Dutch
11 Finnish
12 Norwegian
Configuring the Printer 2-9